Planning the layout before you begin the tile installation process is essential to a great-looking project. Professional tile installer know how to lay out the tile so that the grout lines are symmetrical and trimmed sections are level. Avoid installing narrow rows of cut tiles on your wall. A good layout uses a method similar to the floor layout. Here are the steps to follow for successful tile installation. Read on to learn more about the best practices for tile installation.

Before you begin laying the tiles, you’ll need to measure the area. Most professionals charge by square footage, so the larger the area, the cheaper the per square foot cost. To determine the area, measure the length and width of the room. For example, a 10-foot-by-12-foot room will require 120 square feet of tile. If you don’t know how to measure the area, you can use a ruler to estimate the total space. Be sure to overestimate the area, so that you can account for odd-shaped cuts or broken tiles.

After you’ve decided on the size of the area, you can start installing the tiles. Remember to leave an eighth-inch space between the tile and the wall. This will allow the tile to move with the house. When installing tiles, be sure to cut out the shoe moldings or skirting boards so that you don’t end up with too much space between tiles and trim. This is an essential step that will make your installation a success.

When it comes to pricing, it is important to consider the size of the project. Most professionals charge by the square footage, so the bigger the area, the lower the cost per square foot. To calculate the exact area, simply multiply the length and width by two and multiply by two. A 10-foot-by-12-foot room will require 120 square feet of tile. However, it’s always best to overestimate to allow for any unusual shapes and broken tiles.

Preparing the subfloor is the most important step in a tile installation. There are two main methods of installing tiles: thinset and cement mortar. The latter is less labor-intensive and is more effective than the former. Using cement mortar and thinset mortar, you’ll be able to apply tiles over the backer board. The final step is to apply the grout between the tiles. A good mix of grout will keep your tiles from chipping and cracking.

Before installing tile, it’s important to make sure the subfloor is level and stable. It is vital to have a level subfloor. The thickness of your subfloor will determine the thickness of the tiles. Afterward, it’s important to measure the width of the tiles. You can also measure the depth of the subfloor to ensure its strength. A large-sized area will require the most care and attention. You should measure the dimensions of the floor joists so that you can be sure you have the proper amount of grout for the installation. If you need tile installation service in Long Island visit